IKEA shoes storage – A set of containers of shoes for your front door, closet or room can help barnyard what becomes a difficult mess for many families. Without a definite home, it is easy to let the shoes fall where they may, pulled feet at random points throughout the house. A storage tank multi-level set is easy to build: the effort of an evening and a project to reach even beginners. The hardest part is cutting precision. An irregular cutting can make the bin itself as unattractive as loose shoes on the floor. Place a sheet of plywood small tip on the edge of the sheet of plywood long, forming an L-shape. Glue in place. Reinforce the glue with a line of nails, one at each end and two evenly spaced in between.
Attach a second sheet of plywood to the open edge of the L, making it a C. glue and nail as it did the first. Set the remaining small sheets of plywood on end between the ends of the C. Space them every six inches. Glue and nail, in turn, using the same method as you did for the end pieces. Repeat steps 1 to 3 of IKEA shoes storage to build additional levels of its storage container. Each level will have five pairs of shoes.
12 Photos Gallery of: Try to Make IKEA Shoes Storage
Stack your levels above each other, plywood sheets long at the top. Measure the height, width and depth of the stacked layers. Cut two sheets of plywood 1/4 inch to match the height and depth of levels. Glue plywood sheet on each side of stacked levels. Align the edges with the edges of the stands. This will prevent containers from sliding off shoes when jostled themselves. Cut a sheet of plywood 1/4-inch to match the height and width of its levels. Place the sheet of plywood on the back of their storage tanks. Paste along the edges of the layers. This will help keep the levels together and keep falling shoes from the back of your finished IKEA shoes storage.