Cork tiles for walls are a natural and ecological product, whose composition makes it waterproof and resistant to chemicals, insects and other organisms. It is light, odorless and elastic; with a high fire resistance because it does not promote flame spread nor gives off toxic gases. These characteristics, together with its good as thermal insulation and acoustic, make this material an ideal coating for walls, especially in areas prone to moisture stays. Strips or tiles, installation is very simple. For fixing only a layer of glue is needed.
Before putting cork tiles for walls, cork should rest for at least 48 hours in room where it is installed. Boxes and packages containing parts must remain open so that, thus, cork suit temperature and humidity of space. If coating is carried out in winter and house is new, you must connect heater to avoid, insofar as possible, fluctuations in temperature and humidity.
12 Photos Gallery of: Ideal Cork Tiles for Walls
Walls must be dry, clean and smooth, so it is necessary to repair and correct any cracks, chips, unevenness and other damage. If surfaces of cork tiles for walls are porous, it has to apply a primer to seal pores. Being a natural product, variations are possible in texture and tone. For this reason, so that end result is homogeneous, it is necessary to select and distribute different parts before putting them on stand.